S2 - Shock & Vibration Sensor (S2-D40D200)
S2-D40D200
S2 Shock & Vibration Sensor
$2,000.00
2,000.00
In stock
Aluminum
Digital Capacitive Accelerometer: ± 40g
Digital Capacitive Accelerometer: ± 200g
Battery: 200 mAh
Storage: 4 GB
Digital Capacitive Accelerometer: ± 40g
Digital Capacitive Accelerometer: ± 200g
Battery: 200 mAh
Storage: 4 GB
Lead Time: 10 business days plus shipping - Shipping & Ordering
S2-D40D200
The new S2 ("mini") vibration & shock sensor comes equipped with two accelerometers in addition to the standard embedded sensor suite of a gyroscope, magnetometer, pressure, temperature, humidity, and light.
The primary accelerometer has a ±40g range which provides the greatest utility between measuring vibration events as well as typical small impacts. Its secondary ±200g accelerometer is useful for low power triggering and to help capture even higher shock levels. This model is ideal for general purpose vibration and shock testing, especially when you don't have a great understanding of the acceleration levels in your environment.
Product Features
- Convenient, Configurable, and Reliable Learn More
- Standalone Measurement System
Embedded sensors, storage & power - Selectable High-Performance Accelerometers
Variable capacitance, piezoelectric & piezoresistive
Selectable measurement range from 16g to 2,000g
Selectable sampling rate up to 20,000 samples per second - Up to 4 Billion Data Points of Memory
- Embedded Sensor Suite
Gyroscope, magnetometer, pressure, temperature, humidity & light - Triggering from Sensors and/or Time-Based
- Rechargeable Battery Life of Over 4 Hours Continuous
Can operate with external power - Simple USB Interface for Download & Charging
- NIST Traceable Calibration
- Trusted by Over 1,500 Different Commercial Customers
Accelerometer Specifications>> More Information
Accelerometer Type | Range | Sampling Rate | Bandwidth | Noise | Resolution |
Digital Capacitive | ± 40g | 4,000 Hz | 0 to 300 Hz | < 0.01 gRMS | 0.00008 g |
Digital Capacitive | ± 200g | 3,200 Hz | 0 to 500 Hz | < 0.2 gRMS | 0.05 g |
Frequency Response Plot
Additional Sensor Specifications >> More Information
Sensor | Measurement Range | Resolution | Sampling Rate |
Gyroscope | 2000°/s | 0.06 °/s | 0 (off) to 200 Hz |
Magnetometer | ± 1300 µT | 0.3 µT | 0 (off) to 10 Hz |
Temperature | -40 to 85 °C | 0.01 °C | 0 (off) to 10 Hz |
Pressure | 1 to 200 kPa | 1.6 Pa | 0 (off) to 10 Hz |
Humidity | 0 to 100 %RH | 0.04% RH | 0 (off) to 10 Hz |
Light | 0 to > 20 uV | <100 mlx | 0 (off) to 4 Hz |
Environmental Specifications >> More Information
Parameter | Range | Notes |
Operating Temperature | -10°C to 80°C (14°F to 176°F) | |
Recommended Storage Temperature | 15°C to 30°C (59°F to 86°F) | Recharging Temperature 0°C to 45°C (32°F to 113°F) |
Humidity | 0 to 95 %RH | Non-Condensing |
Pressure | 20 kPa to 110 kPa (2.9 psi to 16.0 psi) | Absolute Pressure |
Shock Limit | >3,000 g | Refer to Shock Report (PDF) |
No Electric Field Susceptibility | 2 MHz to 18 GHz @ 200 V/m | Refer to EMI Test Report (PDF) |
No Magnetic Field Susceptibility | 30 Hz to 100 kHz | Refer to EMI Test Report (PDF) |
Battery performance is heavily dependent upon the device configuration (sensor sample rates and triggers), battery age (including charging cycles), and temperature. The following table provides the battery life and storage capacity of this device assuming it has a relatively new battery and it is at room temperature. When showing performance it assumes all sensors are on at the default sample rate with the main accelerometer sample rate driving performance. With triggers, it assumes the device is in trigger mode 99% of the time. Here are some additional resources: Setting Sensor Configuration, Battery Specifications, Battery Life Estimator Tool.
Sample Rate | Storage Capacity | Continuous Recording | Main Accel. Trigger | 2nd Accel. Trigger | Periodic/Time Trigger |
63 Hz | 11 days | 26 hours | 18 days | 24 days | 62 days |
250 Hz | 9 days | 26 hours | 18 days | 24 days | 60 days |
1,000 Hz | 5 days | 23 hours | 18 days | 23 days | 57 days |
4,000 Hz | 39 hours | 14 hours | 16 days | 20 days | 41 days |
Dimensions>> Download CAD Model
Mechanical Specifications >> Mounting
Mass | 40 grams |
Case Material | Aluminum |
Mounting - Screw | 4-40 Bolts (70 in-oz) |
Mounting - Tape (Double Sided) | 3M 950 Tape |
Length | 56.9 mm (2.24") |
Width | 29.8 mm (1.18") |
Thickness | 15.0 mm (0.59") |
Ingress Protection | IP 50 (Dust Protected) |
Free Software Features>> More Information
Why enDAQ?
- Convenient Intuitive Operation and Sensors that Can Go Anywhere Learn More
- Configurable Selectable Sensor Packages and Configurable Settings and Software Learn More
- Reliable Every Device is Calibrated and Made in the USA to Ensure Quality Learn More
enDAQ Accessories

Engineered to provide an IP68 rating. It also comes equipped with two rectangular mounting magnets each with a 54.1 lb pulling force.
» Product Available
Resources