S3 Shock Sensor
Piezoelectric Accelerometer: ± 2,000g
Digital Capacitive Accelerometer: ± 40g
Battery: 250 mAh
Storage: 8 GB
S3-E2000D40
Why enDAQ?
Demo with an Engineer
Visit our Help Center
Customer Testimonials
Contact Customer Success
The S3-E2000D40 is a shock recorder with a high performance piezoelectric accelerometer, a secondary capacitive accelerometer and other environmental sensors. This model is most popular for shock testing due its wide 2,000g range.
PLEASE NOTE: LONGER LEAD TIMES
Due to the global chip shortage, some of our products require a longer lead time than the usual 2 business days + shipping. We sincerely apologize for the inconvenience and are working tirelessly to transition to a more readily available microprocessor. In the meantime, if you have any questions, please do not hesitate to reach out to our Customer Success Team.
Click for AVAILABLE PRODUCTS
Complimentary enDAQ Pelican case included with every enDAQ® sensor order.
Additional cases can be purchased here: enDAQ Accessories
Convenient |
|
---|---|
Adaptable |
|
Reliable |
|
Accelerometer Type | Range | Sampling Rate | Bandwidth | Noise | Resolution |
Piezoelectric | ± 2,000g | 20,000 Hz | 5 to 1,000 Hz | < 1.0 gRMS | 0.06 g |
Digital Capacitive | ± 40g | 4,000 Hz | 0 to 300 Hz | < 0.01 gRMS | 0.00008 g |
Please note: Piezoelectric accelerometers are susceptible to saturation due to exposure to high frequency events because they are AC coupled. If your application will have high frequency events (events with pulse widths less than 1 ms) we recommend checking out our S-R series products.
Find out more in our Piezoelectric Accelerometers Blog Post
Sensor | Measurement Range | Resolution | Sampling Rate |
Gyroscope | 2000°/s | 0.06 °/s | 0 (off) to 200 Hz |
Magnetometer | ± 1300 µT | 0.3 µT | 0 (off) to 10 Hz |
Temperature | -40 to 85 °C | 0.01 °C | 0 (off) to 10 Hz |
Pressure | 1 to 200 kPa | 1.6 Pa | 0 (off) to 10 Hz |
Humidity | 0 to 100 %RH | 0.04% RH | 0 (off) to 10 Hz |
Light | 0 to > 20 uV | <100 mlx | 0 (off) to 4 Hz |
Parameter | Range | Notes |
Operating Temperature | -10°C to 80°C (14°F to 176°F) | |
Recommended Storage Temperature | 15°C to 30°C (59°F to 86°F) | Recharging Temperature 0°C to 45°C (32°F to 113°F) |
Humidity | 0 to 95 %RH | Non-Condensing |
Pressure | 20 kPa to 110 kPa (2.9 psi to 16.0 psi) | Absolute Pressure |
Shock Limit | >3,000 g | Refer to Shock Report (PDF) |
No Electric Field Susceptibility | 2 MHz to 18 GHz @ 200 V/m | Refer to EMI Test Report (PDF) |
No Magnetic Field Susceptibility | 30 Hz to 100 kHz | Refer to EMI Test Report (PDF) |
Sample Rate | Storage Capacity | Continuous Recording | Main Accel. Trigger | 2nd Accel. Trigger | Periodic/Time Trigger |
100 Hz | 22 days | 13 hours | 13 hours | 52 hours | 52 days |
1,000 Hz | 9 days | 12 hours | 13 hours | 52 hours | 49 days |
5,000 Hz | 63 hours | 9 hours | 13 hours | 52 hours | 38 days |
20,000 Hz | 17 hours | 5 hours | 13 hours | 49 hours | 20 days |
Mass | 40 grams |
Case Material | Polycarbonate |
Mounting - Screw | 4-40 Bolts (70 in-oz) |
Mounting - Tape (Double Sided) | 3M 950 Tape |
Length | 76.2 mm (3.00") |
Width | 29.8 mm (1.18") |
Thickness | 15.0 mm (0.59") |
Ingress Protection | IP 50 (Dust Protected) |
- Convenient Intuitive Operation and Sensors that Can Go Anywhere Learn More
- Adaptable Selectable Sensor Packages and Configurable Settings and Software Learn More
- Reliable Every Device is Calibrated and Made in the USA to Ensure Quality Learn More

Engineered to provide an IP68 rating. It also comes equipped with two rectangular mounting magnets each with a 54.1 lb pulling force.
» Product Available
» Click Here for All Accessories