Why enDAQ?
Demo with an Engineer
Visit our Help Center
Customer Testimonials
Contact Customer Success
The Storage on the device will be upgraded from 1 GB to 8 GB
Complimentary enDAQ Pelican case included with every enDAQ® sensor order.
Additional cases can be purchased here: enDAQ Accessories
Application Areas
Develop a Shock, Vibration and Environment Profile with ease & confidence for your specific application!
Take a deep dive of our applications pages for specific application resources.
Product Features
| Convenient |
|
|---|---|
| Adaptable |
|
| Reliable |
|
Accelerometer Specifications>> More Information
| Accelerometer Type | Range | Sampling Rate | Bandwidth | Noise | Resolution |
Frequency Response Plot
Additional Sensor Specifications >> More Information
| Sensor | Measurement Range | Resolution | Sampling Rate |
| Gyroscope | 2000°/s | 0.06 °/s | 0 (off) to 200 Hz |
| Magnetometer | ± 1300 µT | 0.3 µT | 0 (off) to 10 Hz |
| Temperature | -40 to 85 °C | 0.01 °C | 0 (off) to 10 Hz |
| Pressure | 1 to 200 kPa | 1.6 Pa | 0 (off) to 10 Hz |
| Humidity | 0 to 100 %RH | 0.04% RH | 0 (off) to 10 Hz |
| Light | 0 to > 20 uV | <100 mlx | 0 (off) to 4 Hz |
Environmental Specifications >> More Information
| Parameter | Range | Notes |
| Operating Temperature | ||
| Recommended Storage Temperature | 15°C to 30°C (59°F to 86°F) | Recharging Temperature 0°C to 45°C (32°F to 113°F) |
| Humidity | 0 to 95 %RH | Non-Condensing |
| Pressure | 20 kPa to 110 kPa (2.9 psi to 16.0 psi) | Absolute Pressure |
| Shock Limit | >3,000 g | Refer to Shock Report (PDF) |
| No Electric Field Susceptibility | 2 MHz to 18 GHz @ 200 V/m | Refer to EMI Test Report (PDF) |
| No Magnetic Field Susceptibility | 30 Hz to 100 kHz | Refer to EMI Test Report (PDF) |
Battery performance is heavily dependent upon the device configuration (sensor sample rates and triggers), battery age (including charging cycles), and temperature. The following table provides the battery life and storage capacity of this device assuming it has a relatively new battery and it is at room temperature. When showing performance it assumes all sensors are on at the default sample rate with the main accelerometer sample rate driving performance. With triggers, it assumes the device is in trigger mode 99% of the time. Here are some additional resources: Measurement Settings, Battery Specifications, Battery Life Estimator Tool.
| Sample Rate | Storage Capacity | Continuous Recording | Main Accel. Trigger | 2nd Accel. Trigger | Periodic/Time Trigger |
Dimensions>> Download CAD Model
Free Software Features>> More Information
Why enDAQ?
- Convenient - Intuitive Operation and Sensors that Can Go Anywhere Learn More
- Adaptable - Selectable Sensor Packages and Configurable Settings and Software Learn More
- Reliable - Every Device is Calibrated and Made in the USA to Ensure Quality Learn More